COSMO PRIMER

Use COSMO PRIMER:

• Remove all cement residue from your concrete project by wet or dry sanding/polishing.
• Ensure that the concrete project is clean and dust-free.
• Dilute the first coat of COSMO PRIMER with 50% water to prevent streaking.
• Apply 1 coat of COSMO PRIMER with a suitable roller.
• dust dry after 30 minutes
• allow this layer to dry for at least 3 hours
• If necessary, apply an extra coat of COSMO PRIMER if more intensive protection is required.
• Then apply at least 3 coats of COSMO 2C PU for a scratch-resistant finish.